EPOXY 49 — 100% Solids High-Build Clear Epoxy & Metallic Base Coat

EPOXY 49 — 100% Solids High-Build Clear Epoxy & Metallic Base Coat (3-Gal Kit, 2A:1B)

EPOXY 49 (3-Gallon Kit, 2 Parts A : 1 Part B by volume) is a contractor-grade 100% reactive solids cycloaliphatic clear epoxy and 3D metallic floor base coat manufactured by Epoxy49 LLC in Houston, TX. Rated at 11,500 psi compressive strength (ASTM D695), Shore D 82-85 hardness (ASTM D2240), and <10 g/L VOC, each 3-gallon split-bucket kit yields 125-150 sq ft for high-build 32-40 wet-mil metallic pours (dose two 150g Epoxy49 Metallic Mica Pigment jars per kit) or 300-450 sq ft as a clear neat build coat over PRIMER 49 or MVB 49. Pour mixed material immediately onto CSP 2-3 diamond-ground concrete in ribbons and topcoat within 8-24 hours with POLYASPARTIC 49.

Key Engineering Highlights

• TRUE 100% REACTIVE SOLIDS (ASTM D2697): Zero water, zero solvent filler, and zero shrinkage — cures into a 32-40 mil monolithic armor versus 2-3 mil box-store kits.
• EXTREME MECHANICAL STRENGTH: Lab-rated at 11,500 psi compressive strength (ASTM D695), 7,800 psi tensile (ASTM D638), Shore D 82-85 hardness, and >400 psi concrete slab-fail adhesion.
• ARCHITECTURAL 3D METALLIC & NEAT BUILD: Crystal-clear 700-900 cps self-leveling viscosity engineered for 150g Metallic Mica Pigment marbling (125-150 sq ft/kit) or neat builds (300-450 sq ft/kit).
• FACTORY-PROPORTIONED SPLIT BUCKETS: Ships as two 1-Gal Part A resin buckets plus one 1-Gal Part B cycloaliphatic hardener bucket (2:1 by volume) for exact jobsite stoichiometry.
• 50-STATE LOW-VOC & HOUSTON DIRECT: Ultra-low <10 g/L VOC (EPA Method 24 / SCAQMD Rule 1113 compliant), backed by 16-section OSHA GHS SDS and CHEMTREC 24-hour support.

Manufactured by Epoxy49 LLC · 1714 W 23rd St, Houston, TX 77008 · 24-Hr CHEMTREC: 1-800-424-9300.